-Guaranteed Unbreakable UHMW (The UHMW Used in our products will outwear Abrasive Resistant Steel 10 to1, Plus Unmatched Impact Strength)
-Stainless Steel Flanges
-Interlocking Footprint leaves no room for air pockets
-Built-in Ejector to Keep Roots, Stalks & Rock Out!
-Requires minimal down pressure setting for most conditions
-Built in depth control
-Excellent Seed to Soil Contact
-Ideal for wet and cold soils
-Gently stitches the seam to prevent crusting & sidewall compaction
KMOT AG EXPO Minot, ND
January 28-30 Booth# 584
IOWA POWER SHOW Des Moines, IA
February 3-5 Booth 4011
NATIONAL FARM MACHINERY SHOW Louisville Ky.
February 11-14 Booth 930
ABERDEEN AG EXPO Aberdeen, SD
February 24-26 Booth#19
TRIUMPF AG EXPO Omaha NE
March 11&12 Booth#1226
-All John Deere Drills & Air Seeder
-Case IH SDX & PD Series
As farmers ourselves, after many years of No-Tilling & trying many different Ideas, fighting wet soils & soggy conditions, we saw no choice but to come up with our own solution. We needed a closing wheel that would work in all crop rotations & soil conditions ranging from wet, low grounds to dry hilltops. We were looking for the right footprint that could do it all, without causing sidewall compaction.Finally, after 5 years of trial & error, we developed a wheel that tucked the soil firmly against the seed , reduced sidewall compaction , stitched the seam & operated at the minimum down pressure setting for any field condition.The PRO-STITCH closing wheel does an impressive job even in the harshest conditions, As well as ideal conditions. PRO-STITCH wheels are recommended to be mounted staggered (one ahead of the other) & 1- 3/4" - 2- 1/4"apart on the bottom of the wheels. The lightest setting is recommended for most soil conditions.
PRO-STITCH wheels run out of time due to soil pressure, Creating the perfect Stitch Effect. Our "Blunt" tooth design applies 6 times more down pressure to the sidewall of the trench as compared to standard round closing wheels, Thus reducing sidewall compaction by fracturing & pushing the seed slot from side to side.